Tagged: CLI

0

Cisco NX-OS: CLI notes

1. NX-OS supports aliases “cli alias name <name of alias> <command>” conf tcli alias name wr copy run star => can use “wr” to save config NX-OS also supports multiple commands aliases. Use “;” as separator: 2. IOS range command =>  3. CTRL+0 => clear the screen 4. Tab to complete the command  5. Admins of efault VDC can verify or...

0

Cisco WLC ACL using CLI

Configuring access-lists on the Cisco Wireless Controller could be tough with line by line and a lot of clicks. Using CLI the idea is the same, but Notepad++ is very helpful in editing. The one rule consist of the following settings: rule number direction source address destination address protocol source port destination port action permit ip any any (outbound) – allow...